Power-Switch And Leds; Usb3.0 Type-A Connector; Table 44: Power Led (1); Table 45: Button Functions (2) - Kontron FlatClient ECO User Manual

8.5.2.

Power-Switch and LEDs

Figure 22: Power-Switch and LEDs

1 2 3

Table 44: Power LED (1)

LED
Off
Green
Green blinking

Table 45: Button Functions (2)

Button Functions
Pressed during active system
Pressed when power LED is
green-blinking
Pressed when system was
shut-down

Table 46: Drive Activity (3)

LED
Off
Blinking
8.5.3.

USB3.0 Type-A Connector

Table 47: Pinout USB 2.0

www.kontron.com
FlatClient ECO and FlatClient PRO, FlatClient RCK and FlatClient STS – User Guide Rev. 1.99
Power LED
1
Power On
2
LED Drive Activity
3
Signal
No Power
Active
Standby
Activity
OS is put into sleep state
OS is started from sleep state
New OS start
Signal
No Power
Active
Pin Signal Name
1 +USB_VCC
2 USB_D-
3 USB_D+
4 GND
Pin Signal Name
5 USB_RX-
6 USB_RX+
7 GND
8 USB_TX-
9 USB_TX+
// 80