Power-Switch And Leds; Usb3.0 Type-A Connector; Table 37: Power On Button Functions (1); Table 38: Power Led (2) - Kontron FlatClient ECO User Manual

8.4.2.

Power-Switch and LEDs

Figure 18: Power-Switch and LEDs

1 2 3

Table 37: Power On Button Functions (1)

Button Functions
Pressed during active system
Pressed when power LED is
green-blinking
Pressed when system was
shut-down

Table 38: Power LED (2)

LED
Off
Green
Green blinking

Table 39: Drive Activity (3)

LED
Off
Blinking
8.4.3.

USB3.0 Type-A Connector

The power source of +USBVCC can be selected by JP5.

Table 40: Pinout USB3.0 Connector

www.kontron.com
FlatClient ECO and FlatClient PRO, FlatClient RCK and FlatClient STS – User Guide Rev. 1.99
1 Power on
LED Power
2
3 LED Drive Activity
Activity
OS is put into sleep state
OS is started from sleep state
New OS start
Signal
No Power
Active
Standby
Signal
No Power
Active
Pin Signal Name
1 +USBA_VCC
2 USBA_D-
3 USBA_D-
4 GND
5 USBA_RX-
6 USBA_RX+
7 GND
8 USBA_TX-
9 USBA_TX+
Pin Signal Name
10 +USBB_VCC
11 USBB_D-
12 USBB_D-
13 GND
14 USBB_RX-
15 USBB_RX+
16 GND
17 USBB_TX-
18 USBB_TX+
// 76