Preface; Safety; Classification Of Important Information; General Safety Instructions - Nederman Rail System 920 Touchless User Manual

1 Preface
EN
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
10
Rail System 920 Touchless
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
Notes contain other information that is import-
ant for personnel.
2.2 General safety instructions
WARNING! Risk of personal injury
• The system must not be used for other pur-
• The system is designed for use only with sta-
• This product is designed for extracting fumes
• The system must not be used when working
• When working with a running engine and es-
• Check that there is enough suction capacity
• There is a risk of heat injuries since the tele-
poses than extracting fumes.
tionary vehicles. The vehicle must not be
moved when the nozzle has been placed next
to the vehicle exhaust pipe.
from an idling vehicle. Not for continuous
high rpm testing! See allowed exhaust tem-
peratures in Section 3.2 Technical
on the vehicle´s fuel system, when rechar-
ging the batteries or whenever there is a risk
for inflammable dust or explosive gases.
pecially in a maintenance pit a gas detector is
recommended.
in the extraction unit before it is connected
to the vehicle's exhaust pipe. If not, check the
fan impeller rotation direction and/or damper
function. If necessary check the installation
of the fan start switch.
scopic arm and the pin-jointed arm get hot
during high load. In such cases avoid touching
the pipe.
data.