tronical TUNE PLUS Manual page 31

RESTORE FACTORY DEFAULT TUNING PRESETS FOR THE SELECTED TUNING PRESET BANK
1. When the TronicalTune PLUS is switched off, press ON three times.
2. Press the LEFT/RIGHT button to select
3. Use the LEFT/RIGHT button to select the string LED associated with the function. The remaining proce-
dure is the same for each reset function.
4. Press and hold the ENTER and UP buttons simultaneously.
5. LEDs flash sequentially in the same color as the bank = reset confirmed.
6. To reset additional banks, repeat steps 3-5.
NOTE: After a reset, use CALIBRATION MODE to re-calibrate the guitar (P. 33)
RESTORE TO ORIGINAL FACTORY SETTINGS
(also highly recommended when changing string gauges)
• When the TronicalTune PLUS is switched off, press ON three times.
• Press the LEFT/RIGHT button to select
• Press the LEFT/RIGHT button to select
• Press and hold the ENTER and UP buttons simultaneously.
• CYAN LEDs light sequentially = reset confirmed.
• After a reset, use CALIBRATION MODE to re-calibrate the guitar (Page 33).
NOTE: This procedure erases all custom tunings.
RED e string LED. Press ENTER.
RED e string LED. Press ENTER.
E LED lights CYAN .
31