Signal Words; Safe Use Recommendations - Vestil HDC-905 Series Instruction Manual

Hydraulic drum crushers
Hide thumbs Also See for HDC-905 Series:
Table of Contents

Advertisement

Rev. 2/21/2017

Signal Words:

This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable seriousness of
those injuries, if the product is misused in the ways described. Other signal words call attention to uses of the product likely
cause property damage. The signal words used appear below along with the meaning of each word
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS
INJURY.
Identifies practices likely to result in product/property damage, such as operation that might
damage the product.

Safe Use Recommendations:

Vestil strives to identify foreseeable hazards associated with the use of its products. However, material handling is
dangerous and no manual can address every conceivable risk. Ultimately, the most effective way to avoid injury is for the
operator to exercise sound judgment whenever using this machine.
Improper or careless operation might result in serious personal injuries or death.
 Failure to read and understand the entire manual before installing, using or servicing the product constitutes misuse.
 Read the manual to refresh your understanding of proper use and maintenance procedures.
 Do not operate the crusher with the loading door open.
 Do not operate the machine if the emergency stop switch does not function properly.
 Do not stand in front of the door during operation.
 Keep clear of all moving parts during operation.
 High pressure oil easily punctures skin which can cause injury such as gangrene. If a hose or coupling develops a
leak, repair the leak before operating the crusher.
 Do not continue to use the crusher if it is damaged or makes unusual noises during operation.
 Do not change the pressure relief valve setting! In particular, do not increase the setting.
 Do not clean out drum crusher unless power is disconnected.
 Do not attempt to crush smooth-walled drums with this machine. Drums must be ribbed to crush properly.
 Do not attempt to crush drums filled with items or materials. Only use this unit to crush empty drums.
 Do not use brake fluids or jack oils in the hydraulic system. Only use AW-32 hydraulic oil or its equal.
 Do not modify the product in any way. Unauthorized modifications might make the lifter unsafe to use and
automatically void the Limited Warranty (see p. 18 and 19).
 DO NOT use this device unless every label is in place and easily readable. (See "Labeling Diagram" on. p. 17)
Hydraulic circuit diagram:
Copyright 2017 Vestil Manufacturing Corp.
Item Part no.
Description
6.5HP, 3-phase, 1740/1440RPM,
1
22-135-010
184T, 9T spline, 230/460TEFC
Pump, 0.97/0.499in
2
22-143-001
2-section
Cartridge valve, check, nose-in, side-
3
99-153-035
out, size 10
Manifold, HDC-905 with decom-
4
22-127-015
pression check valve
5
99-153-028 Valve, sequence, internal pilot + drain
6
99-153-037 Relief valve, 200-350bar, size 10
7
99-153-065 4-way, 3-position motor spool, DO5
8
ZCO-42
Check valve, nose it, side out, size 08
9
99-021-926 Piston cylinder, 4"x36", flange mount
Valve, check, pilot-to-open, 30psi
10
1710
crack, 3:1, size 10
11
1808-65
Check valve, 08, 25psi cracking
12
22-031-007 Spin-on filter, 10 micron
13
22-514-010 Reservoir, hydraulic, steel, 15gal.
14
99-031-035 Inlet screen, 100mesh, 1" FNPT inlet
15
6408-H-04
O-ring plug, socket-head, size 04
HDC-905, MANUAL
:
Qty.
1
3
, 9T spline shaft,
1
2
1
1
1
1
1
1
1
1
1
1
1
7
Page 2 of 19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdc-905-idcHdc-905-hc

Table of Contents