Alarm Reset - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
LCD
----End

6.2.16 Alarm Reset

This topic describes how to reset alarm on the LCD.
Context
If you reset alarms on the LCD, all the active and historical alarms for the inverter are deleted
and the SmartLogger starts to collect new alarms.


Procedure

Issue 04 (2013-12-15)
If you perform Data Clear for inverters, you need to perform Alarm Reset for both the
SmartLogger and the NetEco1000 at the same time. Otherwise, the SmartLogger cannot
collect the alarm information generated by the inverter after Alarm Reset is performed.
If you perform Alarm Reset or Data Clear for the SmartLogger, you also need to perform
Alarm Reset for the NetEco1000. Otherwise the NetEco1000 cannot collect the alarm
information collected by the SmartLogger after Alarm Reset is performed.
The following table describes the procedure for resetting data. The parameter values in
the following figures are for reference only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
5. On the displayed screen, press
6. After the data is cleared, press
further operation is required.
6 User Interface
.
. No
82