Exporting Fault Information - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
The password for login on the LCD is the same as that for login to the WebUI. After you
change a password on the WebUI, the password on the LCD changes synchronously.

7.33 Exporting Fault Information

This topic describes how to export fault information over the WebUI.
On the Maintenance tab page, select Fault Information and click Export Fault Info., as
shown in
User or Special User.
Figure 7-87 Fault information
Issue 04 (2013-12-15)
Click Modify to change the password for the active user.
Figure 7-87. Because of the limited permission, select the User name as Advanced
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Web User Interface
165