Advertisement
20. All electrical maintenance and repairs to be carried out by qualified persons
only.
21. CAUTION-Line terminals may be alive when main switch is in the off position.
Disconnect all power at source before performing any maintenance or repairs.
22. WARNING-DO NOT operates the machine with any electrical panels open.
23. WARNING-The GSA250 has an overload switch and will trip when under
excessive load and will not allow the machine to be switched on if it is
overloaded.
24. Never use equipment that has not been tested and tagged (including cords).
25. Before connecting the machine to power, check the condition of all power leads
and cables on, or used in conjunction with the machine. Do not use it if any
fault(s) cuts; wear marks, bare wires out of plugs or sockets, etc...
Get qualified persons to repair and re-tag it as required by regulations in your
country.
8
Advertisement
