Advertisement
Safety Precautions
The Floor Grinder has been designed to minimize noise and vibration levels and to
Provide maximum operator safety. However, incorrect use of the grinder may
cause serious injury and therefore the following precautions must be taken:
1. Read and understand the instructions on the machine. Different models may
have different parts and controls.
2. Equipment should only be operated by trained personnel, in good physical
condition and mental health (not fatigued). The operator and maintenance
personnel must physically be able to handle the bulk weight and power of this
machine.
3. This is a one person machine. Maintain a safe operating distance to other
personnel. Remember 'one machine, one operator'.
4. This equipment is intended for commercial use.
5. For the operators' safety and the safety of others, always keep all guards and
shrouds in place.
6. Never start or run machine when unattended.
7. This machine is intended for use on floor surface only.
8. Never start or run machine with handle folded or when disk(s) are not in
contact with the surface.
9. Do not lend or rent machine without the operating instructions for the
machine (and the engine, if applicable).
10. Wear clothing suitable for the job and for the work place including, safety
shoes, hard hat, hearing protection, non-fogging vented safety goggles, and
dust mask suitable for dust.
11. Keep body part or any loose clothing away from moving parts. Failure to
comply could result in bodily injury.
12. Do not modify machine in any way. Only use genuine DG250-II parts and
accessories.
2
Advertisement
