Sensor cap with
memory chip
Intelligent membrane
(IQMC technology)
Automatic sensor
recognition
1.2
Recommended fields of application
On site measurements in rivers, lakes and wastewater
Applications in water laboratories
BOD measurements
2
Measuring / Operation
2.1
General information on the handling of the sensor cap
Despite its exterior robustness, the sensor is a high precision optical instrument. Therefore, you should take the
following precautions when dealing with the FDO
Please do not touch the sensor membrane with your fingers
Avoid any great mechanical stress of the sensor membrane (pressure, scratches)
2.2
Commissioning
Scope of delivery
Preparing the sensor
for measurement
A memory chip is integrated in the sensor cap. The following data are stored
on the memory chip:
Type designation of the sensor cap
Series number
Data of the factory calibration or user calibration
For each membrane, the individual calibration values are determined by a
factory calibration process and stored to the memory chip of the sensor cap,
ensuring maximum accuracy over the whole lifetime of the sensor.
The data of the sensor and sensor cap is recalled by the meter when the
sensor is connected and is used for measurement and for measured value
documentation. The calibration data are stored in the sensor cap. Thus, the
calibration is automatically retained if the sensor or meter are exchanged.
The digital transmission technique guarantees the failure-free
communication with the meter even with long connection cables.
®
925/STM:
®
D.O. sensor FDO
Check and storage vessel FDO
Operating manual
Connect the sensor to the meter.
The sensor is immediately ready to measure.
5 / 11
925/STM with sensor cap
®
Check