Table of Contents
Advertisement
Power Management Setup, Continued
Low Speed Timeout
The clock on the motherboard can be switched to 8 MHz (after the timeout
period specified in the System Event Timer option expires) when this
option is set to Enabled. The settings are Disabled or Enabled. The
Optimal and Fail-Safe default settings are Disabled.
Do not set this option to Enabled when any VL-Bus adapter cards are
installed. Some VL-Bus adapter cards do not work when the computer runs
at 8 MHz.
Before this option can be set to Enabled, the System Event Timer option
setting must be a value between 1 Min and 15 Min. and the Stop Clock
Mode option must be set to Enabled.
This option is only supported if an S-Series Intel CPU is installed on
the motherboard.
Chapter 4 AMIBIOS Setup
94
Advertisement
Table of Contents
