Stairs - Given Only The Run - Victor C6000 Instruction Manual

STAIRS - GIVEN ONLY THE RUN

Example: You're building a stairway with a total run of 15 Feet. Your desired riser height is 7-1/2 Inches
and desired tread width is 10 Inches. The desired headroom is 6 Feet 8 Inches and floor thickness 10
Inches. Find all stair values, then calulate the rise.
KEY INPUT & DISPLAY
1. Enter run:
On/C On/C
1 5
Feet
Run
2. Find riser height, number of riser, riser underage/overage, tread width, number of treads, tread
overage/underage, stairwell opening, stringer length and angle of incline. As a final step, calcuate the
rise.
Stair
Stair
Stair
Stair
Stair
Stair
Stair
Stair
Stair
Stair
Stair
STAIRS - GIVEN RISE AND RUN
Example: You need to build a stairway with a floor-to-floor height of 12 Feet 1 Inch, a run of 17 Feet 7
Inches, and a nominal desired riser height of 7-1/2 Inches (default). Calculate all stair values.
KEY INPUT & DISPLAY
1. Enter rise and run:
On/C On/C
1 2 1
Feet
1 7
7
Feet
2. Find stair values:
Stair
Stair
Stair
Stair
Inch Rise
Inch Run
Page 28
RUN 15 0
Feet Inch
R-HT 7-1/2
STORED
Inch
RSRS 19.
R+/- 0
Inch
T-WD 10
Inch
TRDS 18.
T+/- 0
Inch
OPEN 10 0
Feet Inch
STRG 18 9
Feet Inch
INCL 36.87˚
RUN 15 0
STORED
Feet Inch
RISE 11 10-1/2
Feet Inch
RISE 12 1
Feet Inch
RUN 17 7
Feet Inch
R-HT 7-5/8
Inch
RSRS 19.
R+/- - 0-1/8
Inch
T-WD 11-3/4
Inch
Cont'd on Page 29
0
0
*