Notes On Changing Stored Stairs Variables - Victor C6000 Instruction Manual

6. Find riser height, number of risers, riser underage/overage, tread width, number of treads, tread
overage/underage, length of stairwell opening, stringer length and angle of incline. As a final step,
calculate the run.
Stair
Stair
Stair
Stair
Stair
Stair
Stair
Stair
Stair
Stair
*
Stair
*Continuous presses of
values.
Notes on Changing Stored Stair Variables:
To Change Desired Riser Height: If you wish to use a Desired Riser Height of other than 7-1/2 Inches (the calculator's
default), simply enter a new value. For example, to enter 8 Inches, enter
your new entry. This value will be permanently stored until you change it.
To Change Desired Tread Width: If you wish to use a Desired Tread Width of other than 10 Inches (the calculator's
default), simply enter a new value. For example, to enter 10-1/2 Inches, enter
Press 9 to review your new entry. This value will be permanently stored until you change it.
Rcl
To Change Desired Floor Thickness: If you wish to use a Desired Floor Thickness of other than 10 Inches (the
calculator's default), simply enter a new value. For example, to enter 12 Inches, enter
8
Press to review your new entry. This value will be permanently stored until you change it.
Rcl
To Change Desired Headroom: If you wish to use a Desired Headroom other than 6 Feet 8 Inches (the calculator's
default), simply select a new value via preference Mode and use
examples below. This value will be permanently stored until you change it.
KEY INPUT & DISPLAY
1. Select Headroom via Preference Mode:
On/C On/C
Conv Stor Stor
Stor
2. Decrease Headroom Height by 2 Inches:
– –
3. Then increase Headroom Height by 4 Inches:
+ + + +
4. Return Headroom Height to default of 6 Feet 8 Inches:
– –
will also recall stored desired riser height, tread, headroom and floor thickness
Stair
Stor
8
Inch
1
+ –
or keys to increase/decrease by one inch. See
Page 27
R-HT 7-1/2
R+/- 0-1/2
T-WD
STORED
OPEN 10
STRG 16
INCL 36.87˚
RUN 13
RISE
STORED
7 . Press to review
7
Stor
Rcl
0 1 / 2
Inch Stor
1 2
8
Inch Stor
HDRM 6
HDRM 6
HDRM 6
HDRM 6
Inch
RSRS 17.
Inch
10
Inch
TRDS 16.
T+/- 0
Inch
0
Feet Inch
8
Feet Inch
4
Feet Inch
10 7
Feet Inch
9 .
.
0
8
Feet Inch
6
Feet Inch
10
Feet Inch
8
Feet Inch