Ozito Power X Change PXPLS-082 Instruction Manual

Ozito Power X Change PXPLS-082 Instruction Manual

Cordless planer

Advertisement

Quick Links

CORDLESS
PLANER
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
15,000/min
Planing Width:
82mm
Planing Depth:
0-2mm
Rebate Depth:
0-8mm
Blade Type:
Reversible 65Mn
Blade Dimensions: 82 x 5.5 x 1.2mm
Weight:
2.41kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
STANDARD EQUIPMENT
Cordless Planer
Parallel Guide, Angle Bracket
& Rebate Guide
2 x Thumb Screws, Carriage
Bolt & Wingnut
Spanner & Hex Key
PXPLS-082
0520

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power X Change PXPLS-082 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito Power X Change PXPLS-082

  • Page 1 Reversible 65Mn Spanner & Hex Key Blade Dimensions: 82 x 5.5 x 1.2mm Weight: 2.41kg ozito.com.au PXPLS-082 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    BATTERY & CHARGER 3. Place one of the supplied thumbscrews This tool is compatible with all batteries & chargers from the Ozito Power X Change into the hole and tighten by rotating it range.
  • Page 3: Operation

    OPERATION 3. CONTROLS Dust Extraction WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE A vacuum can be fitted to the dust PERFORMING ANY OF THE FOLLOWING TASKS. extraction chute during planing jobs to collect dust and wood chips, keeping the work area cleaner.
  • Page 4 Parallel Guide Adjustment Turning The Tool On/Off 1. Loosen the parallel guide wingnut. 1. Press and hold the lock-off button. 2. Slide the guide to the required position and tighten the wingnut. 2. Pull the on/off trigger to start the tool. You can then release the lock-off button.
  • Page 5: Using The Planer

    4. USING THE PLANER Planing Flat Surfaces Chamfering Edges 1. Set the required depth on the planer. The planer has a precision machined ‘V’ groove in the front base plate for making 45° chamfers along the edges of your workpiece. 1.
  • Page 6: Maintenance

    MAINTENANCE WARNING! BEFORE CLEANING OR CARRYING OUT ANY MAINTENANCE PROCEDURE, ENSURE THAT 5. REBATE CUTS THE BATTERIES HAVE BEEN REMOVED. Cleaning Making a Rebate Cut • Keep the ventilation slots of the tool clean at all times to ensure efficient Rebates are recesses or grooves cut into the operation.
  • Page 7: Description Of Symbols

    When not in use, the tool should be stored in a dry, frost free location, keep out of children’s reach. New Zealand 0508 069 486 E-mail: enquiries@ozito.com.au Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the tool by an unauthorised person or by mishandling.
  • Page 8: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New risk of fire and electric shock.

Table of Contents