Preface
To the OEM
The AMI EZ-Flex system is a state of the art combination of a Base Board
and CPU Cards that includes the AMI Hi-Flex EISA BIOS. It is assumed
that you have licensed the rights to the AMI documentation for the AMI
EZ-Flex.
This manual was written for the OEM to assist in the proper installation,
use, and operation of the EZ-Flex products. This manual is not meant to
be read by the computer owner who purchases a computer with the EZ-
Flex Base Board. It is assumed that you, the computer manufacturer, will
use this manual as a sourcebook of information, and that parts of this
manual will be included in the computer owner's manual.
Technical Support
If an AMI EZ-Flex Base Board or CPU Card fails to operate as described
or you need more information, call AMI technical support at 404-246-
8600.
Acknowledgments
This manual was written by Paul Narushoff, who gratefully
acknowledges the assistance of Terry Lauer and Sukha Ghosh.
What You Should Have Received
When you received the AMI EZ-Flex System, you should have received:
•
an EZ-Flex Base Board and an EZ-Flex CPU Card,
•
an EISA Configuration Utility (ECU) and the AMI ECU User's Guide,
•
the AMI EZ-Flex Base Board User's Guide and an AMI EZ-Flex CPU
Card User's Guide,
•
two serial port cables (10-pin berg to 9-pin male DB connector).
•
one parallel port cable (26-pin berg to 25-pin female DB connector).
AMI EZ-Flex Base Board User's Guide
v