Setup Key Use - American Megatrends EZ-Flex User Manual

Setup Key Use

Keystroke
<Esc> Returns to previous screen.
, , , and Move the cursor from one option to the next.
<PgUp> and Modify the default value of the options for the highlighted
<PgDn>; parameter. If there are fewer than 10 options, <Ctrl>
<Ctrl><PgUp> <PgUp> and <Ctrl> <PgDn> operate like <PgUp> and
<Ctrl><PgDn> <PgDn>.
<F2> Change background colors.
<F3> Change foreground colors.
<F5> Restores the values resident when the current Setup
session began. These values are taken from CMOS
RAM if CMOS RAM was uncorrupted at the start of the
session. Otherwise, the BIOS Setup default values are
used.
<F6> Loads all features in Advanced CMOS Setup with the
BIOS Setup defaults.
<F7> Loads all features in the Advanced CMOS Setup with the
Power-On defaults.
<F10> Saves all changes made to Setup and returns to DOS.
Note: The default value for <F5>, <F6>, and <F7> is
always N. To execute these options, change the N to
Y and press <Enter>.
AMI EZ-Flex Base Board User's Guide
Action
61