Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita DGD800 Instruction Manual

ENGLISH (Original instructions)
1. Button
2. Red indicator
3. Battery cartridge
4. Star marking
5. Indicator lamps

SPECIFICATIONS

Collet capacity
Max. wheel point diameter
Max. mandrel (shank) length
No load speed (n
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
... Wear safety glasses.
Intended use
The tool is intended for grinding ferrous materials or
deburring castings.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
4
Explanation of general view
6. CHECK button
7. Slide switch
8. Indication lamp
9. Wrench 13
10. Wheel point
Model
) / Rated speed (n)
0
Net weight
DGD800
402 mm
3. Keep children and bystanders away while
END221-4
operating a power tool. Distractions can cause you
to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
ENE050-1
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
GEA006-2
conditions. Water entering a power tool will increase
the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
11. Collet nut
12. Limit mark
13. Holder cap cover
14. Screwdriver
15. Brush holder cap
1/4", 6 mm and/or 8 mm
36 mm
46 mm
-1
26,000 (min
2.0 kg
D.C. 18 V
DGD801
)
307 mm
1.7 kg