American Megatrends Apollo IV User Manual page 54

Advanced Setup,
Continued
st
1 Boot Device This option sets the type of device for the first boot drives that the AMIBIOS
attempts to boot from after AMIBIOS POST completes. The settings are
Disabled, Network, Floppy, ARMD-FDD, ARMD-HDD, ATAPI, SCSI,
CDROM, 1
Optimal and Fail-Safe default settings are Disabled.
2nd Boot Device This option sets the type of device for the second boot drives that the
AMIBIOS attempts to boot from after AMIBIOS POST completes. The
settings are Disabled, Floppy, ARMD-FDD, ARMD-HDD, ATAPI, SCSI,
CDROM, 1
Optimal and Fail-Safe default settings are Disabled.
3rd Boot Device This option sets the type of device for the third boot drives that the AMIBIOS
attempts to boot from after AMIBIOS POST completes. The settings are
Disabled, Floppy, ARMD-FDD, ARMD-HDD, ATAPI, CDROM, 1
HDD, 2nd IDE-HDD, 3
are ARMD-HDD.
4th Boot Device This option sets the type of device for the third boot drives that the AMIBIOS
attempts to boot from after AMIBIOS POST completes. The settings are
Disabled, Floppy, ARMD-FDD, ARMD-HDD, ATAPI, CDROM, 1
HDD, 2nd IDE-HDD, 3
are Disabled.
Try Other Boot Devices Set this option to Yes to instruct AMIBIOS to attempt to boot from
any other drive in the system if it cannot find a boot drive among the drives
specified in the 1
Boot Device options. The settings are Yes or No. The Optimal and Fail-Safe
default settings are Yes.
50 Apollo IV PCI Pentium ISA Motherboard User's Guide
st
IDE-HDD, 2nd IDE-HDD, 3
st
IDE-HDD, 2nd IDE-HDD, 3
rd
IDE HDD, or 4
rd
IDE HDD, or 4
st nd
Boot Device, 2 Boot Device, 3
rd th
IDE HDD, or 4 IDE-HDD. The
rd th
IDE HDD, or 4 IDE-HDD. The
st
th
IDE-HDD. The default settings
st
th
IDE-HDD. The default settings
rd
Boot Device, and 4
IDE-
IDE-
th
Cont'd