American Megatrends Apollo IV User Manual page 18

American megatrends apollo iv motherboards: user guide
Table of Contents

Advertisement

Step 3 Configure CPU
Perform the following steps to configure the
External CPU Clock CLK1, CLK2, and CLK3 are 3-pin bergs that set the CPU external clock
frequency. This motherboard may have any of four different clock generators:
IMI652,
ICS 9147,
ICW, or
PhaseLink.
The CLK1, CLK2, and CLK3 settings are different with the different clock
generators. You must determine the clock generator type (it's next to the
CPU) before setting these jumpers.
IMI 652 Clock Generator The following CLK1, CLK2, and CLK3 settings apply only if an
IMI 652 clock generator is mounted on the motherboard.
External
CLK1
(CPUCLK)
66 MHz
Short Pins 1-2
60 MHz
Short Pins 2-3
55 MHz
Short Pins 2-3
50 MHz
14
Apollo IV PCI Pentium ISA Motherboard User's Guide
Important
motherboard before installing a CPU.
CLK2
Short Pins 1-2
Short Pins 1-2
Short Pins 2-3
N/A
N/A
FREQ1
Short Pins 2-3
Short Pins 2-3
Short Pins 2-3
N/A
Cont'd

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apollo iv pentium pci isa

Table of Contents