Worx WG163E Original Instructions Manual page 9

PRODUCT SAFETY
GENERAL SAFETY WARNINGS
WARNING: Read all
safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The appliance is only to be used
with the power supply unit
provided with the appliance.
IMPORTANT
READ CAREFULLY BEFORE
USE
KEEP FOR FUTURE REFERENCE
SAFE OPERATING PRACTICES
1. TRAINING
a) Read the instructions carefully.
Be familiar with the controls
and the correct use of the
machine.
b) Never allow children, persons
with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge or
people unfamiliar with these
instructions to use the machine,
local regulations may restrict
the age of the operator.
c) Keep in mind that the operator
or user is responsible for
accidents or hazards occurring
to other people or their
property.
2. PREPARATION
a) Before use, always visually
inspect the machine for
Cordless Lawn Trimmer/Lawn Edge Trimmer
damaged, missing or
misplaced guards or shields.
b) Never operate the machine
while people, especially
children, or pets are nearby.
3. OPERATION
a) Wear eye protection, long
trousers and stout shoes at
all times while operating the
machine.
b) Avoid using the machine
in bad weather conditions
especially when there is a risk
of lightning.
c) Use the machine only in
daylight or good artificial light.
d) Never operate the machine
with damaged guards or
shields or without guards or
shields in place.
e) Switch on the motor only when
the hands and feet are away
from the cutting means.
f) Always disconnect the machine
from the power supply (e.g.
remove the battery pack from
the machine)
1) whenever the machine is left
unattended;
2) before clearing a blockage;
3) before checking, cleaning or
working on the machine;
4) after striking a foreign object;
5) whenever the machine starts
vibrating abnormally.
g) Take care against injury to feet
and hands from the cutting
means.
h) Always ensure that the
ventilation openings are kept
clear of debris.
i) Never fit metal cutting
elements.
j) Always be sure of your footing
9
EN