Subscribe to Our Youtube Channel
Related Manuals for Ethnicraft OAK MADRA 51203
Summary of Contents for Ethnicraft OAK MADRA 51203
- Page 1 ASSEMBLY INSTRUCTIONS FOR BED INSTALLATION OAK MADRA BED - WITH SLATS 51203 OAK MADRA BED - US KING SIZE - WITH SLATS 193/203/71 51204 OAK MADRA BED - US/AU QUEEN SIZE - WITH SLATS 153/203/71...
-
Page 2: In Your Package
OAK MADRA BED - WITH SLATS ASSEMBLY INSTRUCTION FOR BED INSTALLATION HARDWARE ENCLOSED TOOLS (10X) (4X) (6X) (6X) L KEY WRENCH JCBC SCREW JCBC SCREW JCBC SCREW L BRACKET 6 X 45 mm (Included in package) (Not included in package) 6 X 20 mm 6 X 6 mm (1X) - Page 3 OAK MADRA BED - WITH SLATS ASSEMBLY INSTRUCTION FOR BED INSTALLATION INSTALLING SIDE RAILS TO HEADBOARD - USE DOWEL Ø12x40 mm (8X) - USE JCBC SCREW M6x45mm (4X) - SCREW LOCATION ON THE BACK SIDE OF BEDHEAD - DO NOT FULLY TIGHTEN INSTALLING FOOTBOARD TO SIDERAILS - USE DOWEL Ø12x40 mm (4X)
- Page 4 OAK MADRA BED - WITH SLATS ASSEMBLY INSTRUCTION FOR BED INSTALLATION INSTALLING MIDDLE LEG TO MIDDLE SUPPORT - USE COUNTERSUNK SCREW M6x50mm (1X) - TIGHTEN FULLY INSTALLING MIDDLE SUPPORT TO ADJUST HEIGHT - USE JCBC SCREW M6x6mm (2X) FOR STEP 2 - USE JCBC SCREW M6x20mm (4X) FOR STEP 3 - DO NOT FULLY TIGHTEN...
- Page 5 OAK MADRA BED - WITH SLATS ASSEMBLY INSTRUCTION FOR BED INSTALLATION TIGHTEN FULLY ALL SCREWS INSTALLING SLATS SUPPORTS - USE JCBC SCREW M6x6mm (4X) FOR STEP 2 - USE JF SCREW M5x60mm (8X) - USE WASHER M6 (8X) - USE NUT M6 (8X) FOR STEP 4 TIGHTEN FULLY...
- Page 6 OAK MADRA BED - WITH SLATS ASSEMBLY INSTRUCTION FOR BED INSTALLATION INSTALLING SLATS - USE JF SCREW M5x60mm (6X) TIGHTEN FULLY SLATS TO BE ASSEMBLED ARE NUMBER 1, 7, AND 13 FINISH...
Need help?
Do you have a question about the OAK MADRA 51203 and is the answer not in the manual?
Questions and answers