Torque Control Indicator - Honda NSS350A E 2020 Manual

20201006171709_32K1BF000_eng_BOOK Page 118 Tuesday, October 06 2020 17:20:39 JST

Torque Control Indicator

If the indicator operates in one of the
following ways, you may have a serious
problem with the Torque Control. Reduce
your speed and have your vehicle inspected
by your dealer as soon as possible.
Indicator comes and stays on (solid) while
●
riding.
Indicator does not come on when the
●
ignition switch is turned to the (On)
position.
Indicator does not go off at speeds above
●
3 km/h (2 mph).
Warning Indicators On or Flashing
Even when the Torque Control indicator is
on, your vehicle will have normal riding ability
without Torque Control function.
When the indicator comes on while the
u
Torque Control is in operation, you will
have to completely close the throttle to
regain normal riding ability.
The Torque Control indicator may come on if
you rotate the rear wheel while your vehicle
is lifted off the ground. In this case, turn the
ignition switch to the
then to the (On) position again. The Torque
Control indicator will go off after your speed
reaches 3 km/h (2 mph).
Torque Control Indicator
u
(Off) position, and
115