3.8.3. Auxiliary UART Port
The auxiliary UART port is designed as a general purpose UART for communication with DTE. It also
supports log output for firmware debugging, and hardware flow control*. Its baud rate is 115200bps by
default. The following is a reference design of auxiliary UART port.
3.8.4. Bluetooth UART Port*
TBD.
BC950N-N1_Hardware_Design
Module
TXD_DBG
RXD_DBG
GND
Figure 16: Reference Design of Debug UART Port
Module
TXD_AUX
RXD_AUX
GND
Figure 17: Reference Design of Auxiliary UART Port
Module
TXD_BT*
RXD_BT*
GND
Figure 18: Reference Design of Bluetooth UART Port
LPWA Module Series
BC950N-N1 Hardware Design
DTE
TXD
RXD
GND
DTE
TXD
RXD
GND
DTE
TXD
RXD
GND
31 / 59