Daewoo CYCLONE DIGI ONE User Manual page 5

35
Before the first time you use your Cordless Vacuum Cleaner
Please read these operating instructions thoroughly and keep them in a safe place for future
reference.
Remove all packing materials and discard responsibly.
Charging the internal Battery
Before use, please ensure that the internal rechargeable battery is fully charged as follows:
1. Insert the Small Power Plug (18) of the Mains Charger (19) into the Charging Socket (11).
2. Plug the Mains Charger (19) into the nearest mains socket.
3. The Battery Indicator (30) will flash green and the Battery Charge Display (26) will count
up to 100% as the internal battery charges.
4. Once the battery is fully charged (after approximately 5 hours), the Battery Charge Display
(26) will display 100 (arrowed below) showing that the internal battery is 100% fully
charged and the Mains Charger (19) can now be removed.
NB Left: The internal battery will
need recharging when the Battery
Indicator (30) flashes red and the
Battery Charge Display (26) reads a
low value (less than 10%). Follow the
above procedure (1 – 4) to recharge
the internal battery.
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
36
Cyclone Digi One 29.6V Cordless Vacuum
35. Pet Brush Tool
36. Floor Polisher Tool
37. Polishing Pads (x2)
38. Motorised Stair Tool
37
38
FLR00043
User Manual
5