Daewoo CYCLONE DIGI ONE User Manual page 10

3
Using the Pet Brush Tool (35)
1. Connect the Pet Brush Tool (35) to the cleaner as shown below:
2
Trigger button
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
3. Left: Place your foot gently on the Floor Polishing
Tool (36) and pull the cleaner back by the Handle
(9).
Press the On/off Trigger Switch (8) to start the
polishing action, move the polisher gently along
the floor as shown left.
Press the switch again at the end of polishing to
switch the cleaner off.
2. Squeeze the trigger on the Pet Brush Tool (35) to reveal
the brush teeth and brush the pets coat as shown
below:
Cyclone Digi One 29.6V Cordless Vacuum
1
FLR00043
User Manual
10