Bluetooth Connection - Sharp PS-919 User Manual

6

Bluetooth Connection

1. Press the SOURCE button repeatedly to switch to Bluetooth mode.
Unit will say "Bluetooth".
2. Make sure that the unit is in pairing mode.
3.
Enable Bluetooth on your device to be paired with the unit. Select
''Sharp PS-919,, from the available devices (enter the password
''0000,, if necessary) to start pairing and connection with the unit.
4.
After successful connection, "Source indicator" indicator turns solid
blue and you hear a voice prompt ("Connected").
5.
This unit is compatible with the voice assistant on your smart device.
NOTES:
– This speaker supports automatic connection with a previously paired
device after power off and power on again.
– If you want to pair with a new Bluetooth device, you must disconnect the
paired device.
– To disconnect the Bluetooth connection, long press
can turn off the Bluetooth function in your smart device. Device will say
"disconected".
Connect two PS-919 via Bluetooth (TWS)
TWS/True wireless Stereo - Duo Mode
• This allows for two PS-919 party speakers to be connected together
as a left and right stereo speakers for a real stereo experience. The fi rst
connected speaker is the master one and the second the slave.
• Press and hold the SOURCE button on the second speaker until the
speaker says "Duo Mode pairing" then release the buttons.
• Please wait until speakers say "Duo Mode connected". The speakers are
now connected to each other.
• Pair the master speaker with your phone.
• For Bluetooth pairing to a Bluetooth-out enabled smart device search for
Bluetooth Pairing name "Sharp PS-919" on your device and pair.
• When you will power off one speaker in Duo Mode, both speakers will
power off .
• When you Power on the speakers, they need to be turned on individu-
ally.
• When both speakers are powered on Duo Mode will automatically
reconnect and you will hear "Duo Mode connected".
• To disconnect Duo Mode press and hold SOURCE button on the slave
speaker until you hear "Duo Mode disconnected"
NOTES:
– It takes up to 1 minute to connect to Duo Mode.
– When you enjoy Duo Mode, Multi phone pairing is not supported. The
Master speaker connects only one Bluetooth device.
– In Duo Mode, you can connect only the Master speaker with the Bluetooth
device.
– To change the Bluetooth device in Duo Mode, press and hold
ter unit for 3 seconds to disconnect current Bluetooth device and connect
to the desired Bluetooth device.
– When you connect a Bluetooth device (iOS device etc.) to this unit or
operate the device, the volume level can be synchronized between each
device.
– When in Duo Mode, the functions of
synchronized with two speakers.
– In Duo Mode, make the distance between the speakers as close as possible
each other.
– Depending on network environment, the Duo Mode may not work well.
– When the Duo Mode is entered, some mobile phones (ex. AptX HD suppor-
ted devices) play music after a brief pause.
– Some mobile phones might not play music properly when you try to
connect Duo Mode during playback.
– Reset the Duo Mode connection: Disconnect by long press the SOURCE
button on the slave speaker until you hear '' Duo Mode disconnected'' .
Connection is reset.
button. Or you
on Mas-
, and buttons will be
Listening to Music from External Device
The unit can be used to listen to the music from many types of external
device.
1.
Connect an auxiliary audio device to the unit through the 3.5mm
audio input port.
2.
Press the SOURCE button to repeatedly to switch to AUX mode. The
blue light fl ashes slowly in Aux mode.
3.
Play and control music on the audio device, and use the
buttons on the unit to adjust the volume.
USB Playback and Charging functions
The USB port on the rear panel of the unit supports playback and charging.
1.
Insert the USB drive into USB slot on the back of the unit.
2.
Unit will enter to USB mode automatically.
3. Unit start play a songs from the USB immediatelly.
NOTES:
– The USB mode only can be entered when the USB device is plugged.
– supports USB memory key up to 32GB
– supported audio formats is MP3
4.
Mobile devices can be charged via the USB port.
Adjust the Light Eff ects
1.
Short press the button on top panel of the unit to change the
fl ashing mode for the center light. There are 4 fl ashing eff ects:
– Colors gradually fl ashing.
– Dynamic fl ashing, the lights will fl ashes with the music.
– Color rotating fl ashing.
– Monochrome rotating fl ashing.
– Off .
2.
Long press (2 sec): changes the side light mode
3.
Longer press (4 secs) : switch all the lights off
and