Basic Operations; Bluetooth Operation; Usb Operation - Sharp HT-SB117 Operation Manual

Operations

■ Basic operations

Standby mode
Press the STANDBY button on the unit or the remote to
put the system into standby mode. To resume normal
operation, press this button again.
Note:
This unit is designed to enter STANDBY mode
automatically, after about 15 minutes (approximately) of
inactivity. Press STANDBY button to wake the unit.
Note:
When you power on the unit from standby, it will resume in
the mode that was last used.
Switching modes
To switch between the modes: Press the
on the unit or on the remote control to select LINE IN,
OPTICAL, HDMI ARC, USB mode, or BT (Bluetooth).
Adjust the Volume
Press the + / - buttons on the unit or press the VOL+ /
VOL- buttons on the remote control to adjust the volume.
If you wish to turn the sound off, press the MUTE button
on the remote control. Press the MUTE button again
or press the VOL+ / VOL- buttons on the unit or on the
remote control to resume normal listening.
Select Equalizer (EQ) Effect
While playing, press the MOVIE, MUSIC, or NEWS
button on the remote control to select the preset
equalizers: Movie (recommended for viewing movies),
Music (recommended for listening to music), NEWS
(recommended for listening to NEWS).

■ Bluetooth operation (5)

The Sound Bar Home Theater System has Bluetooth
capability and is able to receive a signal within a range
of 32 feet. To pair the Sound Bar Home Theater System
with a Bluetooth device:
1.
Press the source button
on the remote control button repeatedly to enter the
Bluetooth mode, the"no bt" message appears on the
display.
2.
Activate your Bluetooth device and select the search
mode.
3.
Select "HT-SB117 SHARP" from the search list and
connect.
4.
Enter "0000" for a password if prompted.
5.
When the devices are connected to each other, a
confirmation sound will be made. "bt" will show on the
button
display.
6.
You can now playback music from your device.
Please note that the volume on the Bluetooth source
device operates independently of the volume of the
unit.
7.
To turn off the Bluetooth function: disable the function
on your Bluetooth source device.

■ USB operation (6)

1.
Insert the USB storage drive into the USB slot on the
rear panel.
2.
Press the
to select USB mode.
3.
The sound bar will automatically start playing the MP3
tracks from the connected USB drive.
If playback does not start automatically, press the
button.
4.
To skip to the previous/next track, press the
buttons on the remote control.
Notes:
●
MP3 format is supported.
●
Unsupported file formats are skipped. For example,
Word documents (.doc) or MP3 files with extension .dlf
are ignored and not played
●
Even when the files are in a supported format (MP3),
some may not play or display depending on the
compatibility.
●
In some case, reading may be as long as 60 seconds,
this is not a malfunction.
●
Depending on the amount of data and media speed,
it may take longer for the unit to read the USB device.
●
The maximum USB memory size is 32GB.
●
USB memory device must be formatted in FAT, FAT16
or FAT32
E-12
on the unit, or button
button repeatedly on the remote control