Authentic Models ASA106 Instructions page 2

ASA106 Instructions Page 2
5. Connect Main Sail to Mast:
Pass the metal rod at the end of the mainsail's spar
through the two eyehooks on the aft side of the
mast directly below the spreader. Hoist the main
by attaching the S hook of the block to one of the
hooks at spreader's aft. Run the line down the mast
and attach to the eye on the starboard side of the
maststep. Tighten the line by running the
adjustment device up the line until taut.
6. Haul Up the Main Sail:
Connect the line from the mast's spar in the order
indicated above. Place S hooks 1 and 2 in the eyes
Two eyehooks
on the mast's aft side. Connect #3 S hook to the
other hook on the crossbar spreader. Pass the line
through the fairlead guide eye and down the mast.
Attach the S hook the end of the line to eye on
the eye on the port side of the mast just above the
boom eyehook.
The Netherlands
Authentic Models BV
Ambachtsweg 37
NL-3899 AM
Zeewolde
1
2
#3 connects to
3
hardware on spanner
Pass line through
guide eyehook
United States
Authentic Models, Inc.
888 Garfield
P .O. Box 21710
Eugene, OR 97402