Repeat Or Random Play - Sharp CD-DP2400E Operation Manual

! Starting Playback with a Desired Track
You can play a disc starting with the desired track.
1
Whilst in the stop mode, press one of the DISC-1 - DISC-3 but-
tons or DISC SKIP button to select the desired disc.
Selected disc number
2
Press the or button to select the desired track.
Selected track number
You can also select a track by pressing the
remote control.
3
Press the / ( ) button to start playback.
Playback of the selected track starts. When the end of the last track is
reached on the selected disc, the next disc will automatically start playback.
To stop playback:
Press the (CD ) button.
Notes:
" When the DISC SKIP button is pressed during playback, the next disc will begin
automatically.
" When one of the DISC-1 - DISC-3 buttons is pressed during playback, the
selected disc will begin automatically.

Repeat or random play

! Repeat play
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the
To repeat a desired track:
Perform steps 1 - 4 in "Programmed play" on page 18 and then press the
button twice.
To cancel repeat play:
Press the
" " will go out.
! Random play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random
play.
/ or / button on the
To cancel random play:
Press the
Notes:
" If you press the
selected next by the random operation. On the other hand, the
does not allow you to move to the previous track. The beginning of the track being
played will be located.
" In random play, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
wise, the disc(s) will play continuously.
/ ( ) button twice.
/ ( ) button again.
button.
/ button during random play, you can move to the track
01/7/17 CD-DP2400E_2.fm
CD-DP2400E
/ ( )
/ button
(CD ) button. Other-
17