Table of Contents
Advertisement
WaveData
Connect to WaveData
To facilitate product installation, the device is configured in bridge mode and
predefined with two interfaces.
LAN: static IP 169.254.1.254. LAN interface includes all Ethernet ports and
Wi-Fi interfaces.
LAN_DHCP: LAN interface configured as a DHCP client.
In this way, we will have two IPs on the LAN interface:
A fixed IP address 169.254.1.254: available for local connection to the device
when there is no DHCP server in the installation.
An IP address obtained by a DHCP client when the device is installed on
a network where the Router assigns addresses to devices on the network
with a DHCP server.
In order to access device user following credentials
Default IP: LAN => 169.254.1.254, LAN_DHCP => DHCP client.
username: root
Password: 76Wave90Data01
WaveData access via SSH
SSH Terminal can execute any command on the WaveData such as install new
packages, remove/add/restart services or configuration. SSH service is running
on port 22.
By default SSH operates on LAN and WAN interfaces and allowed on firewall
configuration. Change firewall rules to block SSH traffic on desired interfaces.
Following example shows how to connect via SSH.
WaveData access via Web
Device has a Web Service running on port 80. By default, Web service is
accessible via LAN and WAN interfaces since web is allowed on all device
firewall zones.
Web Main purpose is perform Network configuration and administration tasks.
Use the following account to login.
username: root
Password: 76Wave90Data01
Web Login
Below is capture of Web Interface login. Input credentials.
8
Advertisement
Table of Contents
