Table of Contents
Advertisement
WaveData
Important Safety Instructions
Before handling or connecting the equipment, please
read this manual!
Safe installation
- Read these instructions before handling or connecting the equipment. Keep
these instructions. Heed all warnings. Follow all instructions.
- Clean only with dry cloth.
- Do not use this apparatus near water. Apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as glasses, shall
be placed on the apparatus.
- Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions. Please allow air circulation around the equipment.
- Do not place the equipment in a highly humid environment.
- Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat. Do not place naked
flames, such as lighted candles on or near the product.
- Do not place the equipment in a place where it can suffer vibrations or shocks.
- Only use attachments/accessories specified by the manufacturer.
Safe operation of equipment connected to the mains supply
- Ambient temperature should not be higher than 45ºC.
- Power requirements for this product are: 220-230V~ 50/60Hz.
- It is strongly recommended not to connect the equipment to the mains supply
until all connections have been done.
- The socket outlet shall be installed near the equipment and shall be easily
accessible.
- To disconnect the equipment from the mains supply pull the plug never the
cable.
- Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
Warning
- Reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture.
This symbol indicates that equipment meets the safety
requirements for Class II equipment.
This symbol indicates that equipment meets the CE marking
requirements.
This symbol indicates that the equipment meets the safety
requirements for Class II equipment.
This symbol indicates that this product can not be treated as
conventional household waste. Make sure product is disposed
of correctly.
Introduction
Ref. 769001 WaveData AP is a next generation of Wireless Access Points with
latest 2.4GHZ IEEE 802.11/b/g/n and 5GHz IEEE 802.11/n/ac Wave2 technologies.
WaveData highlights
IEEE 802.11ac is the next evolution of the Wi-Fi standard. It can reach maximum
throughputs well above a Gigabit per second. The 802.11ac specification
mandates operation in the 5 GHz band, where there is relatively less
interference and more channels are available compared to the 2.4 GHz band.
802.11ac achieves higher performance than 802.11n by using more spatial
streams, wider bandwidth, higher order modulation, and improved bandwidth
management techniques.
WaveData IEEE 802.11ac 5GHz Ratio introduces 80 MHz channel bandwidth in
addition to the 20 MHz and 40 MHz specified in 802.11n. 80 MHz channels is
formed by combining two adjacent, non-overlapping 40 MHz channels.
Multi-user MIMO (MU-MIMO): is an advanced feature defined in the 802.11ac
standard that allows simultaneous multiple transmissions from the access
point (AP) to up to four client stations (STAs). MU-MIMO mode increases client
performance even with fewer antennas.
Wireless features
2.4GHz IEEE 802.11/b/g/n 2 Streams MIMO (2x2).
5GHz IEEE 802.11/n/ac Wave2 with 2 Streams MIMO (2x2)
Up to 16 SSIDs and 124 stations per SSID.
OFDM BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM modulations and
20/40/80MHz bandwidth channels to reach up to 1.73 Gbps. 2x2 On-Board 5
GHz radio, up to 867 Mbps and 2x2 On-Board 2.4 GHz radio, up to 300 Mbps.
4x Dual Band Antenna with +4dBi of antenna gain. 2.4 GHz TX Power:
23.5dBm@MCS0 HT20 and 16.5dBm@MCS9 HT40. 5 GHz TX Power: 22dBm@
MCS0 HT20 and 14.5dBm@MCS9 HT40.
Wi-Fi Security Modes Open, WEP, WPA-PSK and WPA-EAP (aka WPA
Enterprise) and support of WPA-TKIP and WPA-AES ciphers to secure Wi-Fi
connections.
AP Client isolation: To isolate SSID AP clients and avoid STA to STA
communication.
Multi-user MIMO (MU-MIMO): is an advanced feature defined in the
802.11ac standard that allows simultaneous multiple transmissions from the
access point (AP) to up to four client stations (STAs).
Load Band Steering: support simultaneous dual band (2.4 GHz and 5 GHz)
with ability to actively guide customers to the best available bandwidth.
QoS: WMM and 802.11e for Voice, video and other time-sensitive protocols
over Wi-Fi.
Wi-Fi Roaming: fast authentication of mobile clients to the best available AP
using the IEEE 802.11k standards for Radio Resource Management (RRM) and
IEEE 802.11r Fast BSS transition (FT-BSS).
Network Features
Device can operates on Bridging or Routing Modes.
Full IEEE 802.1Q VLAN support over all interfaces: Ethernet and Wi-Fi.
Support network protocols: DCHP, PPPoE, L2TP, to allow a easy integration
with provider network.
Support for Multicast traffic and IGMP or MLD Snooping.
Built in with Firewall to protect and secure device.
Open-VPN to create secure connections with external networks.
IEEE 802.1X port-based authentication with external Radius Server.
Allows authentication of connected devices, establishing a point-to-point
connection or preventing access by that port if authentication fails.
Possibility of powering the device through a PoE IEEE802.3af switch or an
external 12Vdc power supply.
4
Advertisement
Table of Contents
