Wavedata Package Content; Security Considerations; Operating Considerations; Wavedata Device - Televes WAVEDATAP User Manual

System Requirements
The system is an already Plug And Play device and no requires no software
or driver.
To configure device requires PC with an Ethernet or Wi-Fi interface via
web interface. Latest versions of Firefox or Google Chrome are strongly
recommended.

WaveData Package content

1
2
1 WaveData
2 12 Vdc power supply (769002 only)

Security Considerations

Please note that SSH and Web access to the WaveData are accessible on both
LAN and WAN interfaces.
• SSH/Web Access Account root/76Wave90Data01 is public, as this manual.
Changing this password should be done prior to any further configuration.
• The firewall has been enabled on WAN, named WAN Zone: only DHCP requests,
UPNP, SSH and Web are opened to external access.
• The firewall has been enabled on LAN, named LAN Zone: All access requests
from LAN are allowed. NAT is enabled to allow forwarding packets to WAN
network.
On some installations consider change firewall rules to restrict access to device
from LAN (on hotels or public domain networks where user connection to
device is undesired) or WAN (if device obtain a public IP address and WAN is
exposed to external hacks).

Operating Considerations

Consider the following operating notes about WaveData:
• Do not cover device, place device on right place to avoid thermal issues;
thermal dissipation slots on external plastic chassis should be ventilated and
air flow through device.
• Place device on a clear location in order to guarantee Wi-Fi coverage. Device
must be placed on location where Wi-Fi coverage as longer as possible. Mount
device on building wall as possible.

WaveData Device

9
769001
Link
Link
5GHz
Off Low 5GHz
Off Low
Normal
Normal
LAN
USB
LAN
USB
5 4
769002
SFP Link
SFP
Link
OK
5GHz
OK
Off Low 5GHz
Off Low
Normal
Normal
LAN
USB
LAN
USB

Port Connections

1 Kensington Security Slot
There is a slot for a Kensington lock on Wavedata back side to prevent to be
stolen.
2 1xEthernet RJ-45 WAN (PoE) - (only ref. 769002)
Supports passive PoE 24V and IEEE 802.3af/at PoE connector up to 24Watts
(max). Also provide Ethernet 100BASE-TX/1000BASE-T connector with auto-
negotiation and Auto-MDIX.
3 1xSFP 1000BASE-X
SFP 1000BASE-X connector (small form-factor pluggable transceptor). For optic
fibre connection.
4 1xEthernet RJ-45 LAN
Ethernet 1000BASE-T with Auto-MDIX. Provides Wired access to local network.
5 USB Connector
USB 3.0 Connector to plug device storage capacity or Mobile USB Modems
(GPRS, 3G, etc...) to access mobile networks.
6
Jack Power 12-24Vdc
Jack Power is an PoE alternative connector to supply device power with 12-24
Vdc. Max current is 12V/2A.
1 7 8
Link
Link
2.4GHz WPS Reset
2.4GHz WPS Reset
POWER
WAN / PoE
POWER
WAN / PoE 12-24 V
12-24 V
max. 7W
max. 7W
2 6
Link
Link
2.4GHz WPS Reset
2.4GHz WPS Reset
SFP
SFP
POWER
POWER
12-24 V
12-24 V
max. 7W
max. 7W
3
5
EN