Table of Contents
Advertisement
WaveData
Go to Interfaces > LAN > DHCP Server and enable DHCP server on interface.
Finally, to apply changes made click on
Capture shows list of interfaces, with new WAN interface on the list and with IP
assigned by DHCP.
In router mode, LAN_DHCP interface is no longer necessary. Go to Interfaces
and click on the Delete button to remove LAN_DHCP interface.
.
Configure Wi-Fi interfaces
Go to System > Wi-Fi to see Wi-Fi interfaces list.
Interface offers following buttons per interface
Scan: Scan network for available AP.
Add. Create a new VAP.
And following buttons per VAP (Virtual Access Point)
Disable/Enable VAP.
Edit: Configure VAP options.
Remove: Remove VAP from Wi-Fi interface.
Associated Stations
Displays the list of connected clients with Wi-Fi interfaces.
For each client, it shows the SSID with which it is connected, its MAC and the
rates and signal levels of the Wi-Fi connection.
Scan for Wi-Fi networks
When scan for new Wi-Fi networks interface listen to get all AP beaconing on
air.
14
Advertisement
Table of Contents
