Download Print this page
RTI U3 Reference Manual

RTI U3 Reference Manual

Weather resistant remote control

Advertisement

Quick Links

U3
Weather Resistant Remote Control
Product Contents
Contents within the box include the following items:
One (1) U3 Weather Resistant Remote Control
One (1) Charging Dock (Not Water Resistant, Indoor Use Only)
One (1) Cradle
Two (2) Mounting Holster
One (1) Lithium-ion Battery (Installed)
One (1) International Power Supply (5V, 1A)
Four (4) Size 10 Mounting Screws
One (1) Reference Guide
Safety Suggestions
Read and Follow Instructions. Read all safety and operating instructions before
operating the unit.
Retain Instructions. Keep the safety and operating instructions for future
reference.
Heed Warnings. Adhere to all warnings on the unit and in the operating
instructions.
Heat. Keep the unit away from heat sources such as radiators, heat registers,
stoves, etc., including amplifiers that produce heat.
Object Entry. Do not allow objects to fall into the enclosure through openings.
Servicing. Do not attempt any service beyond that described in the operating
instructions. Refer all other service needs to qualified service personnel.
Damage Requiring Service. The unit should be serviced by qualified service
personnel when:
Objects have fallen into the unit.
The unit does not appear to operate normally or exhibits a marked change in
performance.
The unit has been dropped or the enclosure has been damaged.
Weather Resistant Note
The U3 is designed to withstand temporary exposure to water only. Prolonged
exposure may result in the U3 remote malfunctioning. DO NOT ALLOW THE U3
TO REMAIN FLOATING IN WATER.
Cleaning
Occasional cleaning may be required, depending on use. To clean your U3, lightly
dampen a lint-free cloth with plain water or a mild detergent and wipe the display,
keypad and outer surfaces. Do not use harsh chemicals as damage to the unit
may occur.
NOTE: The rubber cover on the backside of the U3 may be removed for cleaning.
Limited Warranty
RTI warrants its products for a period of three (3) years (one year only for
included battery packs); or for a period of time compliant with local laws when
applicable from the date of purchase from RTI or an authorized RTI distributor.
This warranty may be enforced by the original purchaser and subsequent owners
during the warranty period, so long as the original dated sales receipt or other
proof of warranty coverage is presented when warranty service is required.
Except as specified below, this warranty covers all defects in material and
workmanship in this product. The following are not covered by the warranty:
Damage resulting from:
1.
Accident, misuse, abuse, or neglect.
2.
Failure to follow instructions contained in this Guide.
3.
Repair or attempted repair by anyone other than Remote Technologies
Incorporated.
4.
Failure to perform recommended periodic maintenance.
5.
Causes other than product defects, including lack of skill, competence or
experience of user.
6.
Shipment of this product (claims must be made to the carrier).
7.
Being altered or which the serial number has been defaced, modified or
removed.
Contacting RTI
For news about the latest updates, new product information, and new
accessories, please visit our web site at: www.rticorp.com
For general information, you can contact RTI at:
Remote Technologies Incorporated
5775 12th Avenue East, Suite 180
Shakopee, MN 55379
Tel. (952) 253-3100
Fax (952) 253-3131
It's Under Control
Service & Support
If you are encountering any problems or have a question about your RTI
product, please contact RTI Technical Support for assistance (see the Contacting
RTI section of this guide for contact details).
RTI provides technical support by telephone or e-mail. For the highest quality
service, please have the following information ready, or provide it in your e-mail.
Your Name
Company Name
Telephone Number
E-mail Address
Product model and serial number (if applicable)
If you are having a problem with hardware, please note the equipment in your
system, a description of the problem, and any troubleshooting you have already
tried.
If you are having a problem with software, please note what version you have
installed, the operating system on your PC, a description of the problem, and
any troubleshooting you have already tried. If you are calling about a software
or programming question or problem, please be at your computer when you
place your call. This will considerably speed up the troubleshooting process.
*Please do not return products to RTI without return authorization.*
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received including interference
that may cause undesired operation.
Industry Canada Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received including interference
that may cause undesired operation.
Cet appareil est conforme avec Industrie Canada exempts de licence standard
RSS (s). Son fonctionnement est soumis aux deux conditions suivantes:
1.
Ce dispositif ne peut causer des interférences nuisibles.
2.
Cet appareil doit accepter toute interférence reçue y compris des
interférences qui peuvent provoquer un fonctionnement indésirable.
Contains:
FCC ID: MMURTI2300, IC:3166A-RTI2300
DECLARATION OF CONFORMITY (DOC)
The Declaration of Conformity for this product can be found on the RTI website
at: www.rticorp.com/declaration
Copyright © 2019 • Remote Technologies Incorporated • All rights reserved.
®
U3
Weather Resistant Remote Control
Reference Guide
The U3 is designed for reliable wireless control of audio video systems in
environments that are too harsh for normal remote controls. The U3 combines
the convenience of an Electronic Paper Display and the ideal selection of
commonly used keypad buttons. The high contrast display can be customized
from a number of templates to suit the needs of the user. This provides a simple
and flexible interface for operating today's sophisticated electronic systems,
regardless of the location. The U3 is a perfect companion for hot tubs, pools,
bathrooms, and decks.
Key Features
The U3 comes loaded with the following features and much more:
Durable design is water resistant.
Dual RF capability uses 433MHz or 2.4GHz (utilizing Zigbee
Sixteen programmable keypad buttons.
Electronic Paper Display.
technology).
®
70-210211-14 V1.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the U3 and is the answer not in the manual?

Questions and answers

Summary of Contents for RTI U3

  • Page 1 Do not use harsh chemicals as damage to the unit following measures: may occur. • Reorient or relocate the receiving antenna. NOTE: The rubber cover on the backside of the U3 may be removed for cleaning. • Increase the separation between the equipment and the receiver. Limited Warranty •...
  • Page 2 Electronic Paper Display uses minimal battery power to operate. When the unit UPDATING INTEGRATION DESIGNER PROGRAMMING is not in use, the U3 goes into low power mode (the display will stay on) and any When downloading the program file, Integration Designer will check if there is a button press will wake the U3 to full operation status.