Android Settings - Philips 65BDL3552T User Manual

Language
Select the language used in the OSD menu.
The options are: English/Deutsch/ 简体中文 /Français/
Italiano/Español/Pyccкий/Polski/Türkçe/ 繁體中文 / 日本語
/Português/ /Danish/Swedish/Finnish/Norwegian/
Dutch.
Power Save
Mode 1 [TCP off, WOL on, auto off]
Mode 2 [TCP off, WOL on, auto on/off]
Mode 3 [TCP on, WOL off, auto on/off]
Mode 4 [TCP on, WOL off, no auto on/off]
Power save modes
Mode 1: DC off -> Power off. LED: Red.
Power Save -> Power off, LED: Red
Mode 2: DC off -> Power off, LED: Red.
Power Save -> Power Saving. LED: Orange. Can be woken
up.
Mode 3: DC off -> Back light off, LED: Red
Power Save -> Back light off, LED: Orange. Can be woken
up.
Mode 4: DC off -> Back light off, LED: Red
Power Save -> Will not enter power save mode. show "no
signal" only.
RCU Power No Signal
Button Off
Mode 1 DC OFF DC OFF
Mode DC OFF when signal is back,
2 system wake up
Mode Backlight Backlight OFF
3 OFF
Mode Backlight Backlight ON, show no
4 OFF signal
Following table is the action for Android board with
different power mode.
DC off/on: press power button by RC
Power mode in Mode 1/2 Mode 3/4
OSD
DC off shutdown 1. The current source APK(such
DC on Boot up
OPS settings
Set the OPS configuration under each power condition.
• {Auto} - After selecting {Card OPS} for video source
input, the OPS will be set to off when the display power
is set to off, or vice versa. If you set to other video source
inputs, the OPS will always be set to on.
• {Always off} - The OPS will always be set to off.
• {Always on} - The OPS will always be set to on.
Android
board power
off
board power
off
keep power
on
keep power
on
as MediaPlayer, Broswer or
SmartCMS) will be closed.
2. Android system will go to
the default black launcher.
1. Android system reboots
65BDL3552T/75BDL3552T/86BDL3552T
Advanced option reset
Reset all settings in the Advanced option menu to factory
preset values.
1. Press [SET] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the
[SET] button to restore settings to factory preset values.
3. Press the [EXIT] button or select {Cancel} and press the
[SET] button to cancel and then return to the previous
menu.

6.2.6. Android Settings

Please enter the password
Pincode
Default password is 1234.
For more informations
Setting.
37
CANCEL CLEAR OK
please refer to the instructions of 5.