Touch Operation - Philips 65BDL3552T User Manual

65BDL3552T/75BDL3552T/86BDL3552T
3.7.

Touch Operation

This display is equipped with a touch-sensitive screen and
supports the Windows Touch features either by singletouch
or multitouch operation. You can touch the pictures or text
on the display gently with your fingers, and the system will
react.
This section explains about the touch operation on
the display. For further detail on how to run the touch
operation, please refer to the Windows operation
instruction.
Single Tap
Touch the target on the screen with one fingertip for one
quick tap, then release.
Please note that a touch screen will respond to a light touch
from your fingertip when tapping within 2.5mm above touch
screen.
Double Tap
Touch the target on the screen with one fingertip for two
quick taps, then release.
Pan
Touch the target on the screen with one fingertip and move
across the target without losing direct contact, then release.
Flick
Touch the target on the screen with one fingertip and brush
the surface quickly.
Zoom in
Touch the target on the screen with two fingertips holded
together and move them apart to zoom in (magnify) the
screen image.
Zoom out
Touch the target on the screen with two fingertips stretched
apart and move them closer to zoom out (shrink) the screen
image.
Touch and Hold
Touch and hold the target on the screen with one fingertip
for a while to display a context menu or options page for an
item.
Avoid
• Avoid scratching with sharp object on the screen. Only
use your fingertips to perform touch operation.
• Do not expose the screen to intensive light, spotlight, or
wide-spread light.
• Do not install the product to a location where is close to
the windows or glass-doors as the direct sunlight may
affect the touch-control performance.
• To avoid screen interference with each other, do not
place 2 touch screens side by side as shown below.
Fig. Touch screens interference
20