Related Manuals for Philips P Line 65BDL3017P
Summary of Contents for Philips P Line 65BDL3017P
- Page 1 Professional Display Solutions P Line 65BDL3017P User Manual (English) www.philips.com/welcome...
- Page 2 When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. •...
- Page 3 65BDL3017P • Only the lifetime of the display stated in this specification is guaranteed if the display is used under the proper operation conditions. IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a periodic screen refresh application if the unit will display unchanging static content.
- Page 4 65BDL3017P Warning: This equipment is compliant with Class A of EN55032/CISPR 32. In a residential environment this equipment may cause radio interference. Federal Communications Commission (FCC) Notice (U.S. Only) NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
- Page 5 65BDL3017P Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
- Page 6 65BDL3017P Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2.
- Page 7 65BDL3017P China RoHS 根据中国大陆《电器电子产品有害物质限制使用管理办法》，以下部分列出了本产品中可能包含的有害 物质的名称和含量。 有害物质 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 外壳 液晶显示屏 电路板组件* 电源适配器 电源线/连接线 遥控器 本表格依据SJ/T 11364 的规定编制。 *: 电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路、连接器等。 O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572规定的限量要求以下。 X: 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。 上表中打 “X” 的部件， 应功能需要， 部分有害物质含量超出GB/T 26572规定的限量要求， 但符合欧盟 RoHS法规要求...
- Page 8 Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
- Page 9 For more information about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index. page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details.
- Page 10 65BDL3017P Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes.
-
Page 11: Table Of Contents
65BDL3017P Table Of Contents 5.2.2. Screen menu ........15 5.2.3. Audio ............16 5.2.4. Configuration1 menu ......16 Unpacking and Installation ........1 5.2.5. Configuration2 menu ......17 1.1. Unpacking ............1 5.2.6. Option ..........18 1.2. Package Contents ..........1 1.3. Installation Notes ..........1 Supported Media Formats ........ -
Page 12: Unpacking And Installation
LCD display Remote Control Quick start guide • RS232 Daisy Chain Cable and AAA Batteries • Philips logo plate * The supplied power cord varies depending on destination. • AC Switch Cover • USB Cover • Wire Clamper X 3... -
Page 13: Mounting On A Wall
65BDL3017P 1.4. Mounting on a Wall To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that complies with TUV-GS and /or UL1678 standard in North America. Protective Sheet VESA Grid Table... -
Page 14: Mounting In Portrait Orientation
65BDL3017P 1.5. Mounting in Portrait Orientation This display can be installed in portrait orientation. Rotate the display 90 degrees Counterclockwise. The “ ” logo should be on the right side when facing the display. 90° 90° 1.5.1. How to remove the logo 1. -
Page 15: Parts And Functions
65BDL3017P Parts and Functions 2.1. Control Panel [ ] button [MENU] button Press this button to turn the display On or turn the Return to the previous menu while the OSD menu is On. display to standby mode. This button can also be used to activate the OSD menu when the OSD menu is Off. -
Page 16: Input/Output Terminals
65BDL3017P 2.2. Input/Output Terminals RS232 RS232 100-240V DP IN DP OUT HDMI 1 IN HDMI 2 IN HDMI 3 IN HDMI OUT DVI-I IN 50/60Hz 2.5A 7 8 9 10 11 12 AC IN AUDIO LINE OUT AC power input from the wall outlet. Audio output to external AV device. -
Page 17: Remote Control
65BDL3017P 2.3. Remote Control ] POWER button Turn the power On. Turn the power Off. 2.3.1. General functions [PLAY] buttons Fast Rewind/Play/Fast forward/Stop/Pause ] HOME button Access the OSD menu. ] SOURCE button Choose input source. Press [ ] or [ ] button to choose Network HDMI 1... -
Page 18: Id Remote Control
65BDL3017P 2.3.2. ID Remote Control Press [ID] button. The red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the Set remote control ID number when using several displays. ID Mode. The red LED lights up. Press the [ID SET] button again to exit from ID mode. -
Page 19: Inserting The Batteries In The Remote Control
65BDL3017P 2.3.3. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Insert batteries with the correct polarity (+) and (-). 3. -
Page 20: Usb Cover
65BDL3017P 2.4. USB Cover • Use the USB cover and screws to cover the USB stick and micro SD card. 1. Install the USB stick and micro SD card. 2. Use the screws provided to fix the USB cover. • Maximum USB stick size recommended:20(W)x10(H)x60(L) mm 2.5. -
Page 21: Connecting External Equipment
65BDL3017P Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using HDMI video input RS232 RS232 HDMI 1 IN HDMI 2 IN HDMI 3 IN HDMI OUT [HDMI IN] HDMI Out DVD / VCR / VCD 3.2. Connecting a PC 3.2.1. -
Page 22: Using Dp Input
65BDL3017P 3.2.3. Using DP input RS232 RS232 DVI-I DP IN [DP IN] DP Out 3.3. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board. 3.3.1. Display control connection Connect the [RS232 OUT] connector of DISPLAY 1 to the [RS232 IN] connector of DISPLAY 2. -
Page 23: Ir Pass-Through Connection
65BDL3017P 3.5. IR Pass-through Connection [IR OUT] DVD / VCR / VCD [IR IN] (DVD / VCR / VCD) Remote Control 3.6. Wire-connecting to Network INTERNET ROUTER [RJ-45] [RJ-45] Network Settings: 1. Switch the router on and enable its DHCP setting. 2. -
Page 24: Operation
65BDL3017P Operation 1 / 2 Note: The control button described in this section is mainly on the remote control unless specified otherwise. 4.1. Play multimedia files from USB device Return aaa1 aaa2 aaa3 1. Connect your USB device to the USB port on the display. xxx1 xxx2 xxx3... -
Page 25: Osd Menu
65BDL3017P OSD Menu 5.2. OSD Menu Overview An overview of the On-Screen Display (OSD) structure 5.2.1. Picture menu is shown below. You can use it as a reference for further adjustment of your display. Brightness Picture Contrast 5.1. Navigating the OSD Menu Sharpness Screen Black Level... -
Page 26: Screen Menu
65BDL3017P Smart Picture Clock Phase PQ setting Improves focus, clarity and image stability by increasing or decreasing this setting. {Standard} / {Highbright} / {Warm}. Note: VGA input only. Smart Power Zoom mode Smart Power control is not relative to brightness control: PC mode: {Full} / {4:3} / {1:1} / {16:9}/ {21:9}/ {Custom}. -
Page 27: Audio
65BDL3017P Note: This function is only availavle when “Audio Out Sync” H position is on. Moves the horizontal position of the image left or right. Sync. Volume Enable/disable audio out (line out) volume adjustability to V position sync with internal speakers volume, but PD Internal speaker Moves the vertical position of the sound will be forced to be mute. -
Page 28: Configuration2 Menu
Choose from : {Off} / { On} Set the period of time the information OSD is displayed on the upper right corner of the screen. The information OSD Light sensor (require Philips accessory CRD41 External will display when input signal is changed. Sensor Box) - Page 29 65BDL3017P operated by the remote control. (In primary mode, IR Monitor information key will always be processed regardless the monitor id/ Shows information about your display, including Input group settings). source, Resolution, Model name, SW version, serial number, operation hours and MAC address. •...
- Page 30 65BDL3017P The existing daylight on/off menu should be replaced by • {On Time} - Press [ ] or [ ] button to adjust and the the following menu structure: display will turn on at the specified time. The menu item {Daylight saving} opens the submenu that {Off Time} - Press [ ] or [ ] button to adjust and the...
-
Page 31: Supported Media Formats
65BDL3017P Supported Media Formats User operation: No matter what current source it is, when user manually changes source, the failover will USB Multimedia Formats suspend. To make sure failover starts from the 1st priority source after Video format powering on, please set the 1st priority source as boot on Video Codec Resolution Bit Rate... -
Page 32: Input Mode
65BDL3017P Input Mode Timing support: Item Resolution H.Freq. (KHz) V.Freq. (Hz) 720×400 @70Hz DOS 31.469 70.087 640×480 @60Hz DMT 31.469 59.94 640×480 @67Hz MAC 66.667 640×480 @72Hz DMT 37.861 72.809 640×480 @75Hz DMT 37.5 800×600 @56Hz DMT 35.156 56.25 800×600 @60Hz DMT 37.879 60.317 800×600 @72Hz DMT... - Page 33 65BDL3017P • The display settings table complies to the IBM/VESA standards, and based on the analog input. • The DVI support mode is regarded as same to the PC support mode. • The best timing for the vertical frequency to each mode is 60Hz.
-
Page 34: Pixel Defect Policy
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions. -
Page 35: Dark Dot Defects
Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table. -
Page 36: Cleaning And Troubleshooting
65BDL3017P HOW TO AVOID MURA Although we can not guarantee the complete eradication of Mura every time, in general the appearance of Mura can be minimized by these methods: • Lower the backlight brightness • Use a screen saver • Reduce the ambient temperature around the unit Cleaning and Troubleshooting 9.1. -
Page 37: Troubleshooting
65BDL3017P 9.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back 2. Make sure the power switch is of the display is not switched on. switched on. -
Page 38: Warranty Statement
65BDL3017P Warranty Statement Warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow their warranty statement. Region Warranty Period USA, Canada 3 years China 1 year Asia Pacific 3 years Europe... -
Page 39: Technical Specifications
65BDL3017P Technical Specifications Display: Item Specifications 65BDL3017P Screen Size (Active Area) 163.9 cm / 64.5 inch Aspect Ratio 16:9 Number of pixels 3840 (H) x 2160 (V) Pixel pitch 0.372 (H) x 0.372 (V) [mm] Displayable colors 8 bits+FRC, 1.07 Billion colors Brightness (typical) 700 cd/m2 Contrast ratio (typical) - Page 40 65BDL3017P General: Item Specifications 65BDL3017P Power Input 100 - 240V~, 50/60Hz Power Consumption (Max) 330 W Power Consumption (typ.) 155 W Power Consumption (Standby & Off) <0.5 W Dimensions [W x H x D] 1462.3mm(W)x837.3mm(H)x89.9mm(D@Max) /68.9mm(D@Wall mount) Weight 27.8 Kg Gross Weight 34.4 Kg Energy Efficiency Class...
- Page 41 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.