Setting; Network & Internet; Signage Display; General Settings - Philips 65BDL3552T User Manual

65BDL3552T/75BDL3552T/86BDL3552T
5.

Setting

Main items:
(1)Network & internet

(2)Signage Display

(3)App & notifications
(4)Display
(5)System
5.1. Network & internet
(1)Wi-Fi
There are two Wi-Fi modules in this unit, one module is
used for AP function and the other one for STA function.
Go to the wireless network settings. On the available
network list, select an AP (Access Point) on an existing
wireless network.
Notes:
1. Ethernet will be disabled automatically if Wi-Fi is
connected to the network correctly.
2. A particular model of Wi-Fi module is required.
Please consult the dealer or service technician for
help.
(2)Data usage
Wireless and wired network usage.
(3)Hotspot & tethering
After turning it on, mobile phones, tablets, and PCs can
share the platform's WiFi network by connecting to the
hotspot.
You can also use the hotspot function to upload mobile,
tablet, and PC screens to the platform through the interact
software.
(4)Ethernet
Go to the Ethernet network settings and make the
required settings.
After enabling Ethernet, the following settings will show:
(1) Connection Type (available connection types: DHCP
and Static IP).
A. DHCP
DHCP automatically provides the IP address,
Netmask, DNS Address and Gateway to access
the Internet so you do not have to enter them
manually.
If the connection is successful, the current
network configuration will be displayed.
B. Static IP
Enter the IP address, Netmask, DNS address and
gateway manually.
Note:
Input limitation of IP address, netmask, DNS
address and gateway address
(1)Format: number 0-9, decimal point "."
(2) Mac Address
Note:
Ethernet will be disabled automatically if Wi-Fi is
connected to the network correctly.
5.2. Signage Display

(1) General Settings

A. Signage display name

(2) Server Settings

A. Remote control
(3) Source Settings
A. Media player
B. CMND & Play
(4) System tools
A. Clear Storage
B. Import & Export
C. Clone
D. Admin Password
E. Swipe up
5.2.1. General Settings
1. Signage Display Name
Set PD name "PD_" + Ethernet Mac Address.
Note:
Input limitation:
(1) length: maximum 36 characters
(2) format: no limitation
5.2.2. Server Settings
1. Remote Control
Enable or disable the remote control.
Input the server address. If the server is not registered, you
will be asked to enter the PIN code.
Bind status:
28