Installation Of Trackunit Kin; Practical Installation Advice; Installation For Insurance And Anti-Theft Purpose - Trackunit Kin Technical User's Manual

Trackunit Kin

Installation of Trackunit Kin

The Trackunit Kin can be fixed to any assets by using any of the methods shown below:

Practical installation advice


It is very important to be careful when installing the unit, as incorrect installation will
reduce the possible asset tracking capabilities.
The unit must NOT be installed beneath metal plates or
inside closed metal compartments.

The unit must be mounted in any position horizontally, vertically (sideways) etc. using either
screws, strips, or glue.
Optimize the placement of the unit to increase the aerial view as much as possible. For
hiding the unit, make sure it is only mounted beneath plastic parts or similar parts (wood),
but not beneath metal parts.

Installation for insurance and anti-theft purpose

For an installation of the Trackunit KIN with respect to insurance coverage of assets in your
country/region please contact your nearest sales office for support as the Trackunit KIN installation
must be registered and documented for the local insurance company, the associated local alarm
center.
Trackunit KIN, Technical Manual v1.0, November 2020 Page 15