Table of Contents
Advertisement
• After 15 minutes if there is a reading in the outdoor temperature area, move the
transmitter to another room with one wall between the transmitter and the
temperature station. Observe to see if the Temperature remains on consistently for
1-hour.
• If the temperature remains on while in the house then it is likely a
distance/resistance
a location where the temperature reading will hold.
Distance/Resistance
•
• Check Batteries.
Outdoor Temperature Is Stuck or HHH or LLL
• The last outdoor reading may remain (not change) for several hours when
connection is lost.
• The outdoor temperature reading will flash when the connection is first lost or
intermittent between the temperature station and the outdoor transmitter.
• Check
batteries.
Overpowered or underpowered batteries can cause this reading.
• Replace outdoor transmitter.
HI/LO Temperature readings
From normal display, press and release the
records since midnight.
Reset HI | LO Readings:
• Press the
button to view records
• Hold the
button for five seconds to reset all records at one time.
• HI | LO readings will reset to current temperature.
Note: The unit will automatically reset daily temperature record on the 12:00AM
Temperature Trend Arrows
The temperature trend indicators will update every 15 minutes or less. These trends
represent temperature changes over the past three hours. Example: At 12:00 the
arrows will reflect the trend since 9:00. At 12:30 the arrows will indicate the trend
since 9:30.
• UP ARROW: Temperature rising more than 1°C/ 2°F in the past three hours
• DOWN ARROW: Temperature falling more than 1°C/ 2°F in the past three hours
Sensor Search
1. Hold the
button to search for outdoor sensor.
2. Reception Icon
received.
IF the signal is lost, the RX will display the LAST DATA recorded for 10 minutes, after that
10 mins if the signal does not come back then display dashes "--". After 30 minutes start
looking for the RF signal automatically.
La Crosse Technology, Ltd.
issue. Move the transmitter to different locations outside to find
can cause loss of transmitter signal.
will flash while searching and be solid when sensor signal is
button to view HI then LO Temperature
Page 4
Hide quick links:
Advertisement
Table of Contents
