Table of Contents
Advertisement
Flashing Outdoor Temperature
• The outdoor Temperature reading will flash when the connection is first lost or
intermittent between the temperature station and the outdoor transmitter.
Distance/Resistance
•
connection between the transmitter and the temperature station.
• Check the
position
degrees towards the outdoor transmitter for better reception.
• Try the
quick connect
Batteries
often resolve the connection issue.
•
Dashes shown for Outdoor Temperature
• Dashes means the connection is lost between the temperature station and the
outdoor transmitter.
Batteries
often resolve the connection.
•
Distance/Resistance
•
temperature station.
• Reorientation of the temperature station 90 degrees towards the outdoor transmitter
may provide better reception.
• Try the
quick connect
Inaccurate Outdoor Temperature Reading
• The outdoor transmitter reads the environment. When mounted in the home it will
read inside temperature.
• When the transmitter reads high during the day but not at night it is a
problem.
• Side-by-side test: Bring the outdoor transmitter in the house and place it next to
the temperature station for 2 hours.
• Compare indoor and outdoor temperature. The temperatures should be within 4
degrees to be within tolerance. See the section on
• If the transmitter reads correctly when next to the temperature station then try a
different location outside.
• Look for heat sources such as sunlight, door, or window frames, or reflected heat.
Intermittent Outdoor Temperature
• RF (radio frequency) communication may come and go occasionally. This can be
normal in some environments (e.g. moister climates). If transmitter signal is lost,
please wait 2-4 hours for the signal to reconnect on its own.
• Move the outdoor transmitter to a closer location.
• Freezer test: Confirm the temperature station is reading the correct outdoor
transmitter. Place the transmitter in the freezer for an hour and watch the
temperature drop on the temperature station.
• Indoor distance test: Please complete the
temperature station 5-10 feet apart and inside to establish a strong connection.
La Crosse Technology, Ltd.
is generally the cause of intermittent connection or loss of
of the temperature station. Turn the temperature station 90
or
factory
restart.
can cause loss of connection between the transmitter and the
or
factory
restart.
accuracy
for details.
restart
with transmitter and
positioning
Page 3
Hide quick links:
Advertisement
Table of Contents
