Operation; Optional Accessories; Maintenance - Makita 9046 Instruction Manual

Installing paper dust bag (optional
accessory)
► Fig.6: 1. Groove 2. Front fixing cardboard 3. Front
side of paper dust bag
Place the paper dust bag on the paper dust bag holder with
its front side upward. Insert the front fixing cardboard of the
paper dust bag into the groove of the paper dust bag holder.
Then press the upper part of the front fixing cardboard
in arrow direction to hook it onto the claws.
► Fig.7: 1. Claws 2. Upper part
Insert the notch of the paper dust bag into the guide of
the paper dust bag holder. Then install the paper dust
bag holder set on the tool.
► Fig.8: 1. Notch 2. Guide
► Fig.9
NOTE:
• If you connect a Makita dust collector to this
tool, more efficient and cleaner operations can
be performed.

OPERATION

Sanding operation
► Fig.10
CAUTION:
• Never run the tool without the abrasive paper.
You may seriously damage the pad.
• Do not block motor vent with your finger or
hand.
• Never force the tool. Excessive pressure may
decrease the sanding efficiency, damage the
abrasive paper or shorten tool life.
Hold the tool firmly with one hand on the switch handle
and the other hand on the front grip when performing
the tool. Turn the tool on and wait until it attains full
speed. Then gently place the tool on the workpiece sur-
face. Keep the pad flush with the workpiece and apply
slight pressure on the tool.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
To maintain product SAFETY and RELIABILITY,
repairs, carbon brush inspection and replacement, any
other maintenance or adjustment should be performed
by Makita Authorized Service Centers, always using
Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Abrasive paper (with pre-punched holes)
• Velcro type of abrasive paper (with pre-punched
holes)
• Joint 25 (for connecting to vacuum cleaner)
• Paper dust bag
• Paper dust bag holder
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
6 ENGLISH