Pro-Elec PELL0264 Instructions

Solar ground lights

Please read these instructions carefully before use and retain for future reference.

IMPORTANT SAFETY INFORMATION

•

Avoid locations of high temperature or humidity.

•

The lamp is constructed to IP65 suitable for external use.

WHAT'S INCLUDED

•

Lamp assembly x 4.

•

User manual.

•

Assemble the two parts of the ground spike by slotting the longer fin into the slot

in the shorter fin.

•

Engage the 4 round pins into the 4 holes in the bottom of the lamp body.

•

Slide the switch into the ON position then insert the spike into the ground having

first loosened the soil ensuring the solar panel is exposed for maximum charging

efficiency but not in the vicinity of other strong light source or the low light

illumination may not function.

•

Do not attempt to press the lamp into solid earth.

Solar Ground Lights

Model: PELL0264

Table of Contents

Do you have a question about the PELL0264 and is the answer not in the manual?

Page 1 Solar Ground Lights Model: PELL0264 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • Avoid locations of high temperature or humidity. • The lamp is constructed to IP65 suitable for external use. WHAT’S INCLUDED •...
Page 2 OPERATION • Allow at least 8hrs for the battery to fully charge initially. NOTE: the lamp does not light except in low ambient light levels. • When the ambient light falls below a preset level the LEDs will illuminate constantly. CLEANING &...