Advertisement
Quick Links
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Avoid locations of high temperature or humidity.
•
If the light output becomes less bright or flashes, replace the batteries.
•
Always remove the batteries if the light is not to be used for long periods.
•
Never mix new and old batteries or mix different battery types.
INSTALLATION
•
Unscrew the lens unit from the main body and insert the batteries into the holder
noting the correct polarity.
•
Replace the lens unit and turn clockwise to lock into place.
MOTION SENSOR LED LIGHT
PELL0016
Advertisement
Related Manuals for Pro-Elec PELL0016
Summary of Contents for Pro-Elec PELL0016
- Page 1 MOTION SENSOR LED LIGHT PELL0016 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • Avoid locations of high temperature or humidity. • If the light output becomes less bright or flashes, replace the batteries.
- Page 2 • Drill the wall or ceiling in the required location with regard to any concealed wiring or pipework, use a wall plug if required and screw in a dome head screw leaving the head 4mm proud of the surface. • Locate the keyhole slot in the base of the light unit over the screw head and ensure the light is securely fixed.