First Time Installation; Input Selection; Basic Operations; Operation With The Buttons On The Tv - Salora LCD2631DVX Operating Instructions Manual

First Time Installation

When the TV set is operated for the fi rst time, the
following menu screen will be displayed:
Select your Country, Language and Text language
by using " " or " " and " " or " " buttons. Press
OK or RED button to continue. To cancel, press the
BLUE button.
The following menu will be displayed during the
automatic tuning:
After APS is fi nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
If you do not accept the locations and/or the
programme names, you can change them via the
program table.
Do not turn off the TV while initializing firs time
installation.

Input Selection

Once you have connected external systems to your
TV, you can switch to different input sources.
• Press SOURCE button on your remote control for
directly changing sources.
or,
• Select "Source" option from the main menu
by using " " or " " button. Use then " " or
" " button to highlight an input and press " " button
to select.
Note : You can mark desired source options by
pressing the OK button. Therefore, when
button is pressed, only the marked source options will
be available (except for the TV source).
03_MB25_[GB]_(01-TV)_COST_1900UK_IDTV_BRONZE9_26883W_10064216.indd 86 03_MB25_[GB]_(01-TV)_COST_1900UK_IDTV_BRONZE9_26883W_10064216.indd 86

Basic Operations

You can operate your TV using both the remote
control and onset buttons.

Operation with the Buttons on the TV

Volume Setting
• Press "
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
• Press " P/CH + " button to select the next programme or
" P/CH - " button to select the previous programme.
Viewing Main Menu
• Press "
to view main menu. In the Main menu select sub-
menu using " P/CH - " or " P/CH + " buttons and enter
the sub-menu using "
To learn the usage of the menus, refer to the menu
system sections.
AV Mode
• Press the " TV/AV " button in the control panel on the
TV to switch between AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press V+ button to increase the volume. Press V-
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
SOURCE
Programme Selection (Previous or Next
Programme)
• Press " P - " button to select the previous
programme.
• Press " P + " button to select the next programme.
English - 86 -
" button to decrease volume or
"/" " buttons at the same time
" or "
31.08.2009 13:16:44 31.08.2009 13:16:44
" buttons.