Advertisement
6. Attach Fairlead to the front bumper.
Standard Fairlead 4.875" bolt pattern -
First attach the Fairlead convertor mount
plate with the 3/8"-16 nut and bolt on the
passenger side as shown in Figure 8. Attach
your Fairlead to the mounting plate as shown
in Figure 9 with the hardware included with
your winch.
Wide Fairlead 6.00" bolt pattern -
Attach your fairlead directly to the bumper
as shown in Figure 10 using the hardware
included with your winch.
7. Rotate the clutch cap on your winch to the
"Free Spool" position and pull 2-3 feet of cable
out. Feed the cable through the fairlead mount-
ed to your bumper.
8. Re-install the front bumper. Refer to step 1 for
bolt locations. You will use bolts (D) provided
with your winch mount in place of the stock
bolt (B) previously removed. You will use
the rest of the stock hardware to re-install the
bumper.
©2015 Copyright Kappers Fabricating, Inc. All rights reserved
"Figure 8" Fairlead Mount Plate install (Standard Fair
"Figure 9" Fairlead install (Standard Fairlead)
"Figure 10" Fairlead install (Wide Fairlead)
lead)
3
Advertisement
