2016 Honda Pioneer 1000
Winch Mount
Kit Components:
Qty.
Part Description:
1................. Winch Mount Plate
1................. Winch Mount Support Bracket
1................. Fairlead Converter Mount Plate
4.................
M10-1.25 X 30MM Hex Bolt Fine Thread GR8.8 Zinc
4................. M10 Flat Washer Zinc
4................. M10 Lock Washer Zinc
1.................
3/8"-16 X 3/4" Hex Flanged Bolt GR5 Steel Zinc
1.................
3/8"-16 Hex Flanged Nylock Nut GR5 Steel Zinc
2................. #4-40 X 1.50" Screw
2................. #4-40 Nylock Nut
2................. #6 Flat Washer
2................. 3/16" Fender Washer
INSTALLATION INSTRUCTIONS:
1. Start by removing the two cap screws (A)
holding the plastic to the bumper on each side.
Remove the two bolts (B) on the bottom of
the bumper as shown in Figure 2 & 3, and the
four bolts (C) in the bumper tube (as shown in
Figure 3).
"Figure 3" Bumper bolt location
©2015 Copyright Kappers Fabricating, Inc. All rights reserved
PART # 101285
Hardware Kit: HK-321
HK-031
c
c
"Figure 1" Exploded view
"Figure 2" Bumper bolt location
1