Sensor Search; Factory Restart; Care And Maintenance; Specifications - La Crosse Technology CA86515 Manual

• If the Outdoor Sensor loses connection to your Weather Station, the display will show NO after 30 minutes.
• The weather station will search for 3 minutes every hour to try and reconnect with the sensor.
• To search for the sensor, hold the SENSOR button until the Sensor Reception Icon
• Sensor Reception Icon
• If no sensor connection is made, the icon will disappear after 3 minutes of searching. At this point, try a Factory Restart and
change the batteries in your Outdoor Sensor.
Lost Sensor Signal
OUTDOOR
INDOOR
MOON PHASE
M D
The Factory Restart will erase all records and return the station to default settings.
Hold the ALARM and SNOOZE button together to Factory Restart the station.
• Do not mix old and new batteries.
• Do not mix Alkaline, Standard, Lithium, or Rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended period of time.
• Promptly remove expired batteries.
INDOOR:
Temperature Range: 0°C to 37°C (32°F to 99°F)
Humidity Range: 10% to 99% RH
OUTDOOR:
Temperature Range: -40°C to 60°C (-40°F to 140°F)
Transmission Range: over 100 meters (330 feet) in open air RF 433MHz
Update Interval: every 51 seconds.
POWER REQUIREMENTS:
CA86515: 2 "AA" LR6 Batteries (not included)
TX141-Bv3: 2 "AA" LR6 Batteries (not included)
BATTERY LIFE
CA86515: Over 24 months with reputable batteries
TX141-Bv3: Over 24 months with reputable batteries
DIMENSIONS:
CA86515: 137.2 mm L x 42.8 mm D x 111.8 mm H (5.40" L x 1.68" D x 4.40" H)
TX141TH-Bv3: 3.98cm L x 2.08cm W x 12.98cm H (1.57" L x 0.82" W x 5.11" H)
W IRE LE S S T EMP ER ATU RE STATI O N WI T H CO MF ORT ME TER
S E N S OR S EA RC H
will be solid on screen when the connection is established.
Searching for Sensor
OUTDOOR
MOON PHASE
M D
FACTORY R ESTA RT
CAR E AN D MAI NT ENA NC E
SP E C IFICATI O NS
INDOOR
starts to Animate.
7 | PAGE