Demo List - ICP DAS USA TPD Series Programming Manual

3.3 Demo List

We have introduced you four basic demos in the previous chapter respectively. Please
refer the demo list to view the more detailed application.
http://www.icpdas.com/en/download/show.php?num=1000&nation=US&kind1=&model
=&kw=HMIWORKS
Demo
Convert
Demo_All_Widgets
Digital_Clock
Extern
Geometry_API
ICPDAS_Device
Ladder_tags
Modbus
Other
PassWord
Rotary_Switch
ScreenSaver
Set_IP_From_Flash
UART
User_Flash
UserParams
Virtual_Keyboard
VPD_Panelkey_XVboard
ebFonts
TCP/IP
MQTT
TPD/VPD Series – Programming Guide v.1.0.6
Copyright@ 2020 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
Descriptions
This demo shows how to convert between data types
This demo shows how to use widgets in HMIWorks.
This demo makes TouchPAD a digital clock with a setting page for date and time.
How to use the variables of the other frames.
This demo shows how to use the geometry function on the paint box.
How to control the ICPDAS products, e.g., ET-7000, I-7000, M-7000, LC, PM and tM
Series.
How to read/write the Ladder tags.
This demo makes TouchPAD as a Modbus TCP/RTU Master/Slave device in the C
programming language.
The more project example.
Create a virtual password button, the user needs to enter the correct password to
continue next steps.
How to read the value of the rotary switch.
This demo shows how to run a screen saver and then how to go back to the normal
mode program.
Get/Set the network configuration of the TouchPAD from the parameter area in the
internal flash.
This demo test com1 and com2 send/ receive function.
This demo shows how to read/write data from/to the flashes.
Set/Get data from the 256-byte parameter area in the MCU (MicroController Unit)
internal flash.
Create a virtual keyboard.
How to use the Panelkdy and XV-board, the demo only support the VPD device.
How to transmit or show multilingual text with ebFont on TouchPAD.
How to use the TouchPAD as TCP Client/Server.
This demo shows how to use the MQTT API.
Page 73