Table of Contents
Advertisement
Step 5:
Wait until the Download are completed(100%). Adjust the Rotary Switch to
"0" (Run mode), and then reboot the TouchPAD. After rebooting the
TouchPAD, the screen of the TouchPAD will display the project.
Applications are downloaded through Ethernet.
Applicable Model:
TPD-283(U)-H
TPD-433-H(-EU)
TPD-433F-M2
VPD-133(N)-H
VPD-173N(-64)
Step 1:
Connect both the TouchPAD model and the Host PC to the same sub
network, or use a Power over Ethernet Switch, e.g., an NS-205PSE, and
supply power to the TouchPAD model via the PoE Switch.
ET-7000/PET-7000
TPD/VPD Series – Programming Guide v.1.0.6
Copyright@ 2020 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
PoE Switch
NS-205PSE
PC
Ethernet
Internet
TPD-283(U)-M1 / M2 / M3
TPD-433F-H
TPD-703(-64)
VPD-143(N)-H
VPD-173X(-64)
Power supply
KA-52F-48
Power
TPD-283-H
Page 14
Advertisement
Table of Contents
